User manual PowerXtreme X20/X30
E18-X20X30-EN00 www.emergoplus.com Page 17 of 25
▪ Never connect the battery in parallel to any other type of battery,
including the wiring from the car.
▪ Do not work on the LiFePO4 battery or the installation when it is still
live. Only have changes to your electrical installation carried out by
qualified electricians.
▪ After first use or test all connections for (over) heating. Repair or
replace connections that have become too hot.
▪ Check the wiring and connections at least once a year. Immediately
rectify defects such as loose connections and burnt cables.
CAFEFUL!
Observe the polarity of the battery and avoid short
circuits! Equipment whose polarity is incorrectly
connected can be irreparably damaged.
PAY ATTENTION!
Install a fuse and a main switch to the
power circuit according to local
regulations. Place the fuse as close as
possible to the + pole of the battery.
To Next Page
Loading...
