page no. 3 of 36
OUH Range Users, Installation & Servicing Instructions Doc Ref M105 issue 5.8 Apr 2020.
Title Section Contents Page
User Instructions 4
Pre Installation
1.1 Introduction 5
Duties 6
Dimensions 7
1.2 Technical data 8
1.3 General Requirements 10
Installation
2.1 Fitting the unit 14
2.2 General Identication of Items 16
2.3 Fitting the Flue 17
2.4 Electrical Cable Installation 18
2.5 Wiring Diagram 21
2.6 Commissioning and Testing 22
2.7 Servicing 24
Additional Documents
3.1 Fault Finding 28
3.2 List of Parts 29
3.3 Oil Conversion 31
Appendices
Information required for ecodesign (ErP) Directive 2009/125 33
Users, Installation and Servicing Instructions
CONTENTS
Contents
Powrmatic oil fired heaters are only designed for operation
with either certified Gas Oil to BS2869 Class A2 or D, (also
referred to as 35 sec Oil’ or ‘Red Diesel’) and Kerosene to
BS2869 Class C2, (also referred to as ‘28 sec Oil’).
Powrmatic are not able to confirm the suitability of any alternative
blended Industrial Heating Oil (IHO) used to fuel their appliances and as
such will affect the warranty on the appliance.
To Next Page
Loading...
Need help?
General
