3
Safety precautions
Thank you very much for purchasing PR5300 soft starter.
Under the soft starter installation, using and maintenance of process must pay attention to the
following.
Please be sure to read the instructions before installation.
the soft starter must be installed by the professional technical personnel.
The motor specification must match the soft starter.
It is prohibited to connect capacity in U.V.W terminal of soft starter
The bare terminals must be wrapped in electrical tape after installation.
Soft starter or other equipment should be grounding.
Must cut off the input power supply before maintenance.
Not allowed to rob the handling, modification and maintenance of this product.
Only the well-trained personnel can be allowed to operate this unit, please
carefully read the instructions on safety, installation, operation and
maintenance before use. The safe operation of this unit depends on proper
transport, installation, operation and maintenance!
To Next Page
Loading...
Need help?
General
