PPA DZ HOME User Manual

12
300 or
400 mm
300 or
400 mm
7º Step: Fix the rack to the entire length of the gate leaf with solder or screw every
300 or 400 mm.
8º Step: If the door leaf is warped, provide shims to ensure the alignment of
the rack. There are cases where the rack should pass the length of the leaf. In
this case, provide a french hand so you do not jump the teeth when starting
the machine.
FRENCH HAND

PPA DZ HOME Specifications

General

Brand	PPA
Model	DZ HOME
Category	Gate Opener
Language	English