3
IMPORTANT SAFETY INSTRUCTION
Recommendation:
For the installation of the equipment, it is important that the specialized
installer follow all the instructions quoted in this TECHNICAL MANUAL
and in the USER MANUAL.
With the USER MANUAL, the installer must present all information,
uses and safety items of the equipment to the user.
Before using the DZ NEW HOME ANALOG OPERATOR, read and
strictly follow all the instructions contained in this manual.
- Before installing the operator system, make sure that the local
electrical network is compatible with the one required on the
equipment identification label;
- Do not connect the mains until installation / maintenance is complete.
Always make electrical connections to the board with the mains
switched off;
- After installation, make sure that the parts of the gate do not extend
through the roads and public promenade;
- It is mandatory to use full shutdown devices in the operator system.
To Next Page
Loading...
Need help?
General
