Xcelerators Owner’s Manual
Locate the OBD II diagnostic port on your vehicle.
(See page 6 for reference pictures)
DATA SCANNING
STEP 1
STEP 2
Tune Engine
Current Tuning
Data Scanning
Diag. Options
• View real-time engine date while vehicle is running.
Selection arrow will be on “Tune Engine” option.
Press on the keypad to go down to “Data Scanning” press .
STEP 3
View real-time engine data for speed mph, engine temperature, engine rpm, air
lter intake temperature, intake manifold air temperature, throttle percent, mass
air ow, barometric pressure, manifold turbo boost pressure plus more.
17
Press on the keypad to go back to main menu.
Connect the Xcelerator into vehicles diagnostic port. When prompted turn the
ignition key to the RUN position (DO NOT start engine); the Xcelerator will load
through a seris screens and stop. The main menu will load as shown:
To Next Page
Loading...
