PPE Xcelerator - Core Installation and Tuning Processes; Fuse Removal Procedure

Xcelerators Owner’s Manual
Remove fuses corresponding to your vehicle year specied below;
*Note:
The INFO TMNT fuse can be found by opening the driver’s side
door and removing the side panel or will be in the fuse box under
the hood.
All other fuses are located in the fuse box under the hood
(Be sure not to confuse the RDO fuse with the RDO AMP fuse!)
7
FUSE REMOVAL
Year Engine Pull Fuse Pull Fuse Pull Fuse Pull Fuse LOCATION
2001 LB7 SEO-1 SEO-2 CAB
2002 LB7 SEO-1 SEO-2 CAB
2003 LB7 TBC BATT TBC IGNITION INFO RADIO HOOD
2004 LB7 TBC BATT TBC IGNITION INFO RADIO HOOD
2004.5 LLY TBC BATT TBC IGNITION INFO RADIO HOOD
2005 LLY TBC BATT TBC IGNITION INFO RADIO HOOD
2006 LLY2 **INFO **RADIO HOOD
2006.5 LBZ **INFO **RADIO HOOD
2007 LBZ **INFO **RADIO HOOD
2007.5 LMM INFO (TMNT) RDO IPC CAB/HOOD
2008 LMM INFO TMNT RDO IPC CAB/HOOD
2009 LMM INFO TMNT RDO IPC CAB/HOOD
2010 LMM INFO TMNT RDO IPC CAB/HOOD
IMPORTANT!
**2006-2007 LLY2/LBZ ONLY pull fuses if you get a “No
Communication” error while installing your Xcelerator.