PR Elecronics 4801 User Manual

4801
Modbus gateway
Installation and
connection guide
No. 4801V100 - UK

PR Elecronics 4801 Specifications

General

Brand	PR Elecronics
Model	4801
Category	Gateway
Language	English

Summary

Setting up the 4801 Gateway

PC and Browser Requirements for Setup

Download and Install PPS Plugin

Instructions for downloading and installing the PR electronics PPS browser plugin for gateway setup.

Download Plugin Certificate for Offline Use

Connect Gateway LAN2 to Computer

Instructions for connecting the 4801 gateway's LAN2 port to a computer via Ethernet for setup.

Select Gateway from Device List

Login with User ID

Configure Gateway LAN Ports

Details configuration options for LAN1 (PPS) and LAN2 (Modbus TCP/IP) ports of the 4801 gateway.

Change from point to point communication to LAN communication

Access Discovery View Page

Select 4801 Gateway from List

Assign IP Address and Subnet Mask

Steps to assign an available IP address and subnet mask to the 4801 gateway for LAN communication.

Confirm and Apply New Settings

Instructions to confirm new settings and reboot the 4801 gateway.

Connect Gateway LAN2 to Local Network

Change LAN communication setup back to point to point communication

Method 1: Use Discovery for Reverting

Recommended method to revert to point-to-point communication using the discovery tool.

Change IP Settings to Default

Instructions to change the 4801 gateway's IP settings back to default values.

Press 'Apply' to Accept Changes

Confirm and Use Settings (Reboot)

Connect LAN2 for Direct Communication

Method 2: Reset Button for Reverting

Connect LAN2 for Direct Communication (Reset)

4801 Gateway Specifications

TYPE 4801 Specifications

Details specifications including supply voltage, operating temperature, and port types.