To Next PageTo Next PageWhat to do if PR Lighting Equipment lamp is on but the projector doesn’t respond?
If the PR Lighting Equipment lamp illuminates but the projector fails to respond to the controller, ensure the projector is correctly configured. Additionally, try replacing or repairing the DMX cable.
Why is the beam dim on my PR Lighting PR-8100?
If the beam from your PR Lighting Equipment appears dim, verify that the optics are clean.
How to fix PR Lighting Lighting Equipment projector that doesn’t switch on?
If the PR Lighting Equipment projector doesn’t switch on, check the fuse on the power socket.
What to do if PR Lighting Projector lamp comes on but doesn’t respond to the controller?
If the PR Lighting Projector's lamp illuminates but the controller doesn't elicit a response, ensure the projector is correctly configured. Additionally, consider replacing or repairing the DMX cable to resolve the issue.
How to fix dim beam on PR Lighting Projector?
If the beam appears dim on your PR Lighting Projector, verify that the optics are clean. This should help restore the beam's brightness.
General| Brand | PR Lighting |
|---|---|
| Model | PR-8100 |
| Category | Lighting Equipment |
| Language | English |
Connect the power cord to the projector, ensuring correct voltage and earthing.
Details DMX512 connections using XLR plugs and sockets.
Access and modify DMX address settings within the operation menu.
Configure DMX mode and loss of DMX behavior.
Adjust operational options like pan/tilt swap and dimmer invert.
Access factory setup and perform self-tests for diagnostics.
View LED hours, power on hours, temperature, and software version.
Set the projector to operate in DMX mode.
Configure the projector as a master unit in a multi-unit setup.
Configure the projector as a slave unit in a multi-unit setup.
Select and control static scenes for lighting effects.
Manage and edit user-defined lighting scenes for memory slot 1.
Access and manage multiple user memory slots for custom scenes.
Manage and edit user-defined lighting scenes for memory slot 2.
Initialize or reset user memory slots for custom scenes.
Manages light intensity via DMX across different precision modes.
Manages colour temperature and RGB channel effects via DMX.
Manages pan, tilt, and speed adjustments via DMX.
Controls strobe effects and other special functions via DMX.
Indicates DMX signal is OK.
Indicates panel setting is active.
Indicates power or slave mode.
Indicates master mode or self-test.
Covers voltages, power, LED, colours, dimmer, strobe, beam angle, control.
Details housing, temperature, weight, and sizes of the projector.
Provides lux levels at different distances and beam angles.
