To Next PageTo Next PageWhat to do if my PR Lighting Lighting Equipment doesn't respond to the controller?
If your PR Lighting Equipment lamp turns on but doesn't respond to the controller, ensure the lighting fixture’s Start Address is properly set. Also, try replacing or repairing the XLR signal cable.
General| Pan | 540° |
|---|---|
| Tilt | 270° |
| Control | DMX512 |
| Type | Moving Head |
| Control Protocol | DMX512 |
| Input Voltage | AC 200-240V, 50/60 Hz |
| Power Consumption | 1700W |
| DMX Channels | 25 / 29 / 34 |
| Weight | 36.5 kg |
Fixture for indoor use only (IP20), not for mounting on inflammable surfaces.
Installation, operation, and maintenance must be performed by qualified personnel.
Avoid projecting beam onto inflammable surfaces (min 5m), and direct eye exposure.
Handle power cord only by the plug, avoid damage and contact with other cables.
Surface temp up to 55°C. Do not open housing. No user serviceable parts.
Guidance on physically mounting and securing the lighting fixture.
Instructions for connecting the lighting fixture to control systems and power.
How to install a DMX terminator to prevent signal noise.
Procedure for assigning a unique DMX start address to each fixture.
How to navigate the fixture's operation menu and settings.
Details on the DMX protocol and the function of each channel.
Understanding the meaning of LED indicators on the fixture.
Recommendations for keeping the fixture in good working order.
Solutions for problems encountered during operation.
Details on voltage, power, LED quantity, and type.
Information on light output, control methods, and fixture housing.
Operating temperature range and weight specifications.
Graphical representation of the fixture's physical size.
Data showing light intensity at different distances.
Schematic showing internal component connections.
List of parts with order codes for replacement.
