To Next PageTo Next Page
Need help?Do you have a question about the PR Lighting XR 380 BWS and is the answer not in the manual?
General| Brand | PR Lighting |
|---|---|
| Model | XR 380 BWS |
| Category | Lighting Equipment |
| Language | English |
Explains safety signs and provides general warnings for safe operation and handling.
Warnings related to operation, temperature, ventilation, and beam projection safety.
Guidelines for cleaning the projector, including frequency and methods for different parts.
Recommendations for lubricating bearings and sliding bars for smooth movement.
Lists common problems encountered and their corresponding solutions.
Instructions for safely rigging and mounting the projector using clamps and safety cords.
Details on connecting the projector to the power supply, including wire colors and grounding.
Instructions for connecting the projector to a DMX controller using XLR cables.
Explanation and connection diagram for a DMX terminator.
Step-by-step guide for replacing the projector lamp.
Detailed steps for replacing gobos in the projector's gobo holder.
Guide to navigating and using the projector's front panel controls and menus.
How to set the DMX address for multiple projectors to ensure proper addressing.
How the projector operates without a controller, using preset memories.
Instructions for setting up the projector in master/slave configurations for scene editing.
Steps to set the DMX address for the projector.
How to select between short (19CH) and standard (23CH) DMX channel modes.
Options for controlling lamp striking, including auto and DMX control.
Settings for inverting or swapping pan and tilt movements.
Steps to calibrate gobo positioning for precise gobo selection.
Procedure to fine-tune DMX channels for specific functions.
Options to control lamp operation, such as opening or closing shutters.
Settings for adjusting lamp power between full and half power.
Options for resetting head, pan/tilt, or the entire system to default settings.
Selecting between single, cycle, or closed modes for operation.
Managing scenes, including effectiveness, time, and saving DMX values.
Detailed control over individual DMX channels, allowing adjustment from 0-255.
Option to select the display language for the menu interface.
Options to configure display settings, such as normal or inverted screen display.
Setting the display backlight to on or off.
Option to restore the projector to its original factory default settings.
Accessing information about total hours, lamp time, replacements, and fan voltage.
Information about the projector's color wheel, including the number of colors available.
Specifications for the fixed gobo wheel and effect wheel.
Information about the rotating gobo wheel and its gobos.
Details on the prism and frost effects, including their types and rotation.
Specifies the focus control method as DMX linear focus.
Information on dimmer and strobe functionality, including speeds.
Details on pan and tilt movement ranges and control precision.
Specifies the beam angles for beam, spot, and wash effects.
Overview of control features like information display, DMX reception, and preset memory.
Details about optional wireless control and RDM module compatibility.
Information about the housing material and IP rating.
Specifies the net weight of the projector.
Maximum ambient temperature for projector operation.
Diagrams showing the projector's dimensions.
Data on lux output at different distances.
