PR 9106B - Page 13

9106 - Product Version 9106-001 11
2-wire 4...20 mA output:
Signal range (span) ...................................... 3.5...23 mA
Load stabillity .............................................. ≤ 0.01% of span / 100 Ω
Load resistance ........................................... ≤ (V
supply
-3.5) / 0.023 A [Ω]
Max. external 2-wire supply ........................ 26 VDC
Effect of external 2-wire supply
voltage change ............................................ < 0.005% of span / V
Relay output:
Status relay:
Relay function.............................................. ON / OFF
Programmable low setpoint ........................ 0...29.9 mA
Programmable high setpoint ....................... 0...29.9 mA
Hysteresis for setpoints............................... 0.1 mA
Status relay in safe area:
Max. voltage ................................................ 125 VAC / 110 VDC
Max. current ................................................ 0.5 AAC / 0.3 ADC
Max. AC power ........................................... 62.5 VA / 32 W
Marine approval:
Det Norske Veritas, Ships & Offshore ......... Pending
GOST R approval:
VNIIFTRI, Cert No. ....................................... See www.prelectronics.com
SIL certification:
exida, Cert No. ............................................ Pending
Observed authority requirements: Standard:
EMC 2004/108/EC ...................................... EN 61326-1
LVD 2006/95/EC .......................................... EN 61010-1
ATEX 94/9/EC .............................................. EN 60079-0, -11, -15 , -26
and EN 61241-0, -11
IECEx ........................................................... IEC 60079-0, -11, -15 and -26
IEC 61241-0 and -11
c FM us ....................................................... FM 3600, 3611, 3810
CSA E60079-0, -15
CSA 22.2 -25, -142, -213
ANSI/ISA-12.00.01 / 12.12.02
UL, Standard for Safety .............................. UL 61010-1
*SIL .............................................................. *IEC61508
*=Pending
CONTENTS