EasyManua.ls Logo

Practical Devices XM3 - Troubleshooting; Amp Not Turning On; Low Headphone Volume; One Audio Channel Dead

Practical Devices XM3
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Here are some common problems, and their solutions:
Amp does not turn on or respond to pushing the power button:
- Disconnect the battery, hold down the power button
for 10 seconds, then reconnect the battery.
Headphone volume is too quiet, even with the volume knob at full:
- Increase volume of source (MP3 player). If it is still
too quiet, then install the Gain Boost jumpers (see
page 10)
Output is in one ear only; the other channel is dead:
- Check that all cables are completely plugged in all
the way
- Check that your cable is a stereo cable, not a mono
cable.
15