Pramac P2000i - TROUBLESHOOTING AND SPECIFICATIONS; Troubleshooting Diagram

INVERTER GENERATOR – P2000i
39
7 TROUBLESHOOTING AND SPECIFICATIONS
7.1 Troubleshooting Diagram
A ENGINE DOES NOT START
B Turn the engine switch to “ON”, then pull the
recoil starter and c heck if the oil warning light
flickers
C Does not flicker
D Flicker
E Check engine oil level
F OK
Consult a dealer
G Level low
Add engine oil
H Pull the recoil starter and check the spark plug
for spark strength. (See “WARNING”)
WARNING
•
To Prevent FIRE HAZARDS be sure
fuel is not present in the
spark plug
area.
•
To prevent FIRE HAZARDS be sure to
place the spark plug as far way as
possible from ste spark plug hole and
carburetor area.
•
To prevent ELECTRIC SHOCK do not
hold spark plug lead with hand while
testing.
I OK
J Dose not spark
SEE K to the next page
SEE N to the next page