When the first user is added to the controller, the default Open Code will
automatically be deleted, ready for a
new Open Code to be re-entered.
1. Enter Programming Mode
2. Press "1" to enter Menu 1. The
Mode LED will turn red.
3. Insert the new “Opening Code”.
4. The EASYBKA/R returns to
Normal Mode: the Door LED will
turn off and the Mode LED will
turn green.
NOTE
Open Code does not function in Secure Mode.
Wrong entries will return the controller to Normal Mode.
Code 0000 will erase and deactivate the Open Code.
11. Changing the Auxiliary Code
The Auxiliary Code is mainly used as a method to quickly test the
Auxiliary Relay during installation. The Default Factory Setting for the
Auxiliary Code is 0852.
To Next Page
Loading...
