EASYKA – EASYBKA
________________________________________________________________________________________________________________________________________________________________________________________________
18
B. The Code Search Method is mainly used when enrolling a users Secondary Code and the User
Slot Code is unknown. The Code Search method only works if a user's Primary Code is already
enrolled but the Secondary Code is not.
16.1 Enrolling Primary and Secondary Codes using the Standard Method
1. Enter Programming Mode.
2. Press "7" to enter Menu 7: the Door LED will turn orange.
3. Enter the 3-digit User Slot number between 001 to 500 that you wish to enroll
a Primary or Secondary code to. (For example, the User Slot 003 represents
User #3).
If the selected slot has no Primary Code, the Mode LED will flash green,
indicating that the controller is ready to accept a Primary Code.
If the selected slot already has a Primary Code but no Secondary Code, the
Mode LED will flash red, indicating that the controller is ready to accept a
Secondary Code.
If the selected slot already has a Primary and Secondary Code, you will hear a long beep and the
controller will return to Normal Mode.
4. Enter the 4-digit PIN that you want to assign as the Primary or Secondary Code for this slot number. If
the PIN that is entered is valid the Mode LED will stop flashing and then the controller is ready for you
to enter the next 3 Digit slot number (refer to step 3) that you want to assign a code to.
5. Press the "#" key to move to the next slot number (refer to step 4). If you do not wish to continue
enrolling codes, press the "#" key twice and the controller will return to Normal Mode.
16.2 Enrolling Secondary Codes using the Code Search Method
1. Enter Programming Mode
2. Press "7" to enter Menu 7: the Door LED will turn Orange
3. Enter the 3-digit User Slot number 000, the Door LED will flash Orange :
the controller is now waiting for the Primary Code of the User you want to add
a Secondary Code to.
4. Enter the 4 Digit PIN Code of the Primary Code: the Mode LED will flash red
(If the Primary Code entered is not valid, you will hear a long beep and
the EASYKA will continue to wait for a valid Primary Code).
5. Enter the 4-digit PIN Code to be used as the Secondary Code. If the
Secondary Code is valid the controller will beep three times and return to
Normal Mode. (If the Secondary Code is invalid the controller will make a long
beep and then the EASYKA will continue to wait for a valid Secondary code to
be entered).
17. DELETING PRIMARY & SECONDARY CODES
There are two methods to delete Primary and Secondary codes, the Standard Method and the Code Search
Method. When deleting a User Slot, both the Primary Code and the Secondary code are erased.
17.1 Deleting Primary and Secondary Codes using the Standard Method
1. Enter Programming Mode.
2. Press "8" to enter Menu 8: the Mode LED will turn red.
3. Enter the 3-digit User Slot codes you wish to delete: The Mode LED will flash red
indicating the controller is waiting for the Programming Code to confirm the
deletion. If the User Slot is empty you will hear a long beep and the EASYKA will
return to Normal Mode.
4. Enter your Programming Code to confirm the deletion: If the Programming Code is
valid, you will hear three beeps and the EASYKA will return to Normal Mode (If the
Programming Code is invalid, you will hear a long beep and the EASYKA will
return to Normal Mode).
To Next Page
Loading...
