EasyManua.ls Logo

Precision Power DCX 600.4 - QBASS;QBASS PLUS Specifications; Tools;Parts for Installation

Precision Power DCX 600.4
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
QBASS/QBASS PLUS SPECIFICATIONS
QBASS
TM
(
DCX 300.4
)
Up to 18dB of boost centered at 40Hz, with a Q-factor of 2.
QBASS PLUS
TM
(
DCX 600.4, 1000.4, 800.5
)
Up to 18dB of boost with selectable center frequency at 30Hz, 36Hz,
44Hz or 60Hz, with a Q-factor of 2.
Optional
QBASS REMOTE
TM
(
DCX 600.4, 1000.4, 800.5
)
This boost control can be mounted in the dash and will supersede
the boost control on the amplifier endplate.
TOOLS/PARTS FOR INSTALLATION
NOTE:TOOLS ARE NOT SUPPLIED.
Small flat blade screwdriver
Phillips screwdriver (#2 or medium sized)
Wire cutters
Wire strippers
4 - #6 round head screws, and 1 - #8 sheet metal screw. (or nut, bolt,
flat washer, star washer) (see details)
2 - Ring connectors (large enough to accommodate your method of
grounding)
In-line fuse or circuit breaker
Power and ground wire
Speaker wire - 12-16 gauge
Grommets (sized to work with the power wire you plan to use in your
installation)
Tube of silicone sealant
6

Related product manuals