Precision Power PCX 1250 - PCX 1500 Model Details; PCX 1500 Features; PCX 1500 Specifications; System Design Examples

NEW! Advanced Instrumentation Input Stage.
NEW! 12dB/Octave; HP/LP/FULL; 30-4kHz Crossover.
NEW! Independent Line Output Crossover 30-4kHz.
Fully Regulated PWM Power Supply.
Triple Darlington Output Stage.
AM-V Protection Circuitry.
Forced Air Thermal Management.
QBASS Plus™ Bass Boost.
High Voltage Input Capability with -12dB Attenuation Switch.
Gold Plated RCAInput and Output Connectors.
PowerLock™ Speaker and Power Wire Connectors.
3-Yr Warranty; installed by an Authorized PrecisionPower Dealer.
PCX 1500
Power Bandwidth 20 Hz - 20 kHz
Total Harmonic Distortion < 0.02 %
S/N Ratio > 110dB
Input Topology Instrumentation
Input Sensitivity 150mv - 12 Volts RMS
Input Impedance 10k Ohms
Load Impedance (mono) 2 - 8 Ohms
Supply Voltage 11 - 15 Volts
Damping Factor > 500
Slew Rate > 50 V/µS
QBASS PLUS™ Up To +18dB Boost
@ 30, 36, 44, or 60Hz
Crossovers 12dB/Octave
Crossover Frequency 30-4kHz
Subsonic Crossover Frequency 5-80Hz
Idle Current: PCX 1500 2 Amps
MODEL 4ohm MONO 2ohm MONO
PCX 1500 1 X 500 1 X 1000
* ALL POWER RATINGS SHOWN ARE TESTED @ 12V; 20-20kHz
Length Height Width
PCX 1500 25.00” 2.375” 10”
2 19