List of illustrations
LightCutter
viii
© Precitec GmbH & Co. KG • EN 09/2019 D 159195
List of illustrations
Fig. 2-1 Laser head, overall view
2 - 8
Fig. 2-2 Specific versions
2 - 12
Fig. 2-3 Mechanical dimensions, focal lengths 100/125
(straight)
2 - 13
Fig. 2-4 Mechanical dimensions, focal length 150
(straight)
2 - 14
Fig. 2-5 Mechanical dimensions, focal length 200
(straight)
2 - 15
Fig. 2-6 Mechanical dimensions, focal lengths 100/125
(straight with OG-COL)
2 - 16
Fig. 2-7 Mechanical dimensions, focal length 150
(straight with OG-COL)
2 - 17
Fig. 2-8 Mechanical dimensions, focal length 200
(straight with OG-COL)
2 - 18
Fig. 2-9 Mechanical dimensions (angled)
2 - 19
Fig. 2-10 Media connections, laser head
2 - 20
Fig. 2-11 Cutting head, view
(LightCutter 3D version)
2 - 21
Fig. 2-12 Accessories: Adjust box EG8030
2 - 22
Fig. 2-13 Accessories: Optics service case
2 - 22
Fig. 3-1 Fitting: Ceramic part, nozzle
(e.g. LightCutter 100)
3 - 25
Fig. 3-2 Fitting: Laser fibre
(e.g. QBH socket)
3 - 26
Fig. 3-3 Fitting: Sealing the fibre coupling
(e.g. QBH)
3 - 27
Fig. 3-4 Fitting: Laser head to the machine
3 - 28
Fig. 3-5 Installation: Laser head - Grounding
3 - 29
Fig. 3-6 Fitting: Protective window COL
(first-time installation/ fibre replacement)
3 - 30
Fig. 3-7 Installation: Connections - Cutting gas
3 - 31
Fig. 3-8 Installation: Water connections
(collimator)
3 - 32
Fig. 3-9 Installation: Connection diagram
(analysing electronics)
3 - 33
Fig. 4-1 Commissioning: Laser beam - Beam position
4 - 35
Fig. 4-2 Commissioning: Laser beam - Focal position
4 - 37
Fig. 4-3 Commissioning: Laser beam - Reference adjustment
4 - 38
Fig. 4-4 Commissioning: Laser beam - Standoff distance
4 - 39
Fig. 5-1 Maintenance: Maintenance recommendations
5 - 42
Fig. 5-2 Maintenance: Ceramic part, nozzle
(e.g. LightCutter 100)
5 - 43
Fig. 5-3 Maintenance: Protective window cartridge
5 - 44
Fig. 5-4 Maintenance: Protective window
(protective window cartridge)
5 - 45
Fig. 5-5 Maintenance: Seal
(protective window cartridge
)
5 - 46
Fig. 5-6 Maintenance: Sensor insert
(removing short circuits)
5 - 47
Fig. 5-7 Maintenance: Sensor insert
(replacement)
5 - 49
Fig. 6-1 Cutting head, view
(LightCutter 3D version)
6 - 51
Fig. 6-2 Mechanical dimensions
(QBH 3D version)
6 - 53
Fig. 6-3 Connections - Media connections
(3D version)
6 - 54
Fig. 6-4 Installation: Ceramic part, nozzle
(LightCutter 3D)
6 - 55
Fig. 6-5 Installation: Laser fibre
(e.g.QBH socket, 3D)
6 - 56
To Next Page
Loading...
