5.17 Ellipitical Fitness Crosstrainer
Page 64
Diagram 6.19 - Wheel Assembly
4. Reassemble the wheel assembly using such replacement parts as required. Firmly press
one of the bearings into the wheel by hand. Insert the axle through the wheel and into the
bearing that is pressed into the wheel. Slide the remaining bearing over the axle and press
the bearing into the wheel by hand. Be sure that both bearing are fully pressed into the
wheel bearing pockets.
5. Place the wheel into the stairarm and insert and hand tighten the wheel axle screws. Torque
the wheel axle screws to 25 in/lbs.
Wheel
Bearing
Bearing
Axle Screw
Axle
To Next Page
Loading...
