Need help?Do you have a question about the Precor EFX 5.21 and is the answer not in the manual?
General| Resistance Levels | 20 |
|---|---|
| Display Type | LED |
| Max User Weight | 350 lbs |
| Stride Length | 20 inches |
| Programs | 6 |
| Ramp Angle | 20 degrees |
| Heart Rate Monitoring | Yes |
Connect the right stabilizer to the base frame using hex screws and washers.
Secure the console bracket to the right stabilizer using buttonhead screws and lock washers.
Attach the right moving handlebar to the stabilizer axle and secure it.
Connect display console cables, ground wire, and secure console to bracket.
Adjust the EFX ramp incline to one of three positions: Low, Medium, or High.
Ensure the EFX is level and connect the power cord to a grounded outlet.
Explains using touch heart rate grips and chest strap transmitters.
Basic precautions for using the EFX to reduce injury or damage.
Guidelines for safe handling, weight limits, and proper equipment placement.
Safety regarding operating environment, ventilation, and electrical grounding.
How to view the error log and troubleshoot error codes.
To Next Page
