EFX 885, 835, 825
Service Manual 20039-166
Page 115
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Diagram 6.6.9 P20 PCA Pin 1 Reference
15. Connect the Metrics cable, to the Metric board.
16. Replace the P20 Rear Cover removed step 10 and secure the cover with the screws 6 screws. Torque to 10 inch
pounds.
Note: Do not use an electric screw driver or over tighten the screws. Over tightening may damage
the console. This type of damage is not covered under warranty.
17. Replace the P30 Option Cap back cover removed step 9 and secure the cover with the screws 2 screws. Torque
to 10 inch pounds.
To Next Page
Loading...
