EFX 885, 835, 825
Service Manual 20039-166
Page 148
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
7. Replace the pinch bolt and locknut, torque the pinch bolt to 400 inch pounds.
8. Replace the stairarm assembly as described in Procedure 10.13, steps 11 to 12.
9. If you are replacing both crankarm assemblies, repeat steps 6 and 7 for the second crankarm assembly.
10. Replace the right side and/or left side rear cover.
To Next Page
Loading...
