Accessing Club Programming Mode
and Changing the Settings
Read the Club Programming Tips to identify useful information
about customizing your Precor equipment.
To access the available menus and change the program settings,
perform the following steps:
At the Precor banner, press the following keys in sequence
without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note: A PAUSE/REST key appears on some products and
functions the same as the RESET key.
The club programming prompts appear sequentially and in a
menu format. The following table describes which keys to use in
club programming mode.
Table 3. Club Programming Mode keys
Key Description Function
▲
or
▼
Navigational arrow keys
Moves you through the
programs and selections.
OK OK key
Lets you choose or accept the
displayed selection.
CLEAR
Number keypad CLEAR
key
Returns to the previous menu
level without saving any
changes.
RESET
RESET key or
PAUSE/RESET key
Exits Club Programming Mode
and returns to the Precor
banner.
1.
Note: The number keypad is disabled once you enter club
programming mode.
Product Owner's Manual: Club Features 16
To Next Page
Loading...
Need help?
General
