532i Elliptical Fitness CrossTrainer Assembly Guide 2
Hardware Kit (not shown to scale)
Note: Since the hardware kit is used universally across several different product lines, extra fasteners remain
once you complete this assembly.
Fasteners Quantity
(A) Hex head screw (¾-inch) 16
(B) Flat washer (⁵⁄₁₆-inch) 16
(C) Buttonhead screw (2¾-inch) 2
(D) Flat washer (³⁄₈-inch) 2
(E) Split washer (⁵⁄₁₆-inch) 16
(F) Phillips-head cap screw (¾-inch) 3
(G) Locknut (³⁄₈-inch) 2
(H) Buttonhead screw (¾-inch) 8
(J) Flat head screw (³⁄₈-inch) 2
(K) Phillips-head screw, self-tapping screw (⁷⁄₁₆-inch) 8
To Next Page
Loading...
