Attach the covers
The EFX ships with the following cover parts: Two side covers, one front cover,
and two cover retention brackets.
Attaching the plastic covers:
1. Insert seven plastic grommets into the frame in following locations:
Fig
ure 8
2. A
ttach the base cover by fitting its plastic tab into the base frame, then slide the
cover forward and downward to snap it into place.
Fig
ure 9
3. Attach the base cover using two screws
.
4. Attach the front of the base plastic using two screws
.
Fig
ure 10
8
To Next Page
Loading...
