Step-up Pulley/Tensioner assembly Replacement
Applies To: Dual Stage Input Drive
About
This procedure provides instruction to remove and install the Step-up pulley/Tensioner
Assembly for a dual stage input drive assembly.
The Step-up pulley/Tensioner Assembly comprises the first-to-second stage step-up pulleys
and the first and second stage drive belt tensioners.
Procedure
Review entire procedure before starting.
Removal Instructions
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 143
6 Replacement Procedures
Generator/Brake Assembly Replacement
To Next Page
Loading...
