2. Rinse surfaces using a clean lint-free cloth dampened with water only.
3. Then completely dry with another clean lint-free cloth.
Power Requirements
Equipment Power
This machine is a self-powered unit that does not require an external power source to operate.
Pedaling spins the generator which generates the power necessary to operate the machine
including: the system electronics, eddy brake resistance, battery charging, and LED (P10,
P30, P30i and P31) consoles. The battery is used to supply power to operate the lift motor and
to maintain system power for approximately 90 seconds after the pedals have stopped.
Touchscreen (P62, P80, and P82) Consoles
Touchscreen consoles use an external AC
1
/DC
2
power adapter to operate, refer to the doc-
uments shipped with the console for power adapter requirements.
Cable TV and Ethernet Input Signal Requirements
(missing or bad snippet)
1
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
2
Direct Current: electrical current that only flows in one direction.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 15
2 General Information
Power Requirements
To Next Page
Loading...
