6.
Use a 9/16" socket to remove the four Nylock bolts , flat washers , and the Input
Drive Assembly . Discard the four Nylock bolts, these bolts cannot be reused for
installation. Retain washers for installation.
CAUTION:Do not reuse the four Input Drive Assembly Nylock patch bolts for
installation. Discard the used bolts and order new bolts for installation (see Exploded
View Diagrams, bubble # 296).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 151
6 Replacement Procedures
Input Drive Assembly Replacement
To Next Page
Loading...
