6. Use a 9/16" socket to remove the four fasteners (bolts and washers) and remove the
Input Drive Assembly. Discard the four bolt fasteners, the bolt cannot be reused for
installation. Retain washers for installation.
CAUTION:Do not reuse the Input Drive Assy Nylock patch bolt fasteners for install-
ation. Discard the used bolts and order new bolts for installation (see Exploded View
Diagrams, bubble # 296).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 157
6 Replacement Procedures
Input Drive Assembly Replacement
To Next Page
Loading...
