LPCA (Lower PCA) Board Replacement
About
This procedure provides instruction to remove and install the LPCA
1
(Lower PCA
2
) board.
1
Lower printed circuit assembly; generally this refers to the lower board. On treadmills, this is
the motor controller unit (MCU), and on self-powered units, it is the main board in the lower
section.
2
Lower printed circuit assembly; generally this refers to the lower board. On treadmills, this is
the motor controller unit (MCU), and on self-powered units, it is the main board in the lower
section.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 170
6 Replacement Procedures
LPCA (Lower PCA) Board Replacement
To Next Page
Loading...
