Moving Arms Replacement
About
This procedure provides instruction to remove and install the Moving Arms.
Specifications
Fastener Specification
Link Arm Bolt 300 +/- 90 in-lbs (34 +/- 10 Nm)
Inner/Outer Nylock set screw 300 in-lbs (34 Nm)
Procedure
Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Moving Arm removal.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 181
6 Replacement Procedures
Moving Arms Replacement
To Next Page
Loading...
