Precor M8.2E - Page 25

page 19
6. Use the and keys to change the course profile as you pedal. The first
time you customize the course programs “7” or “8,” the course profile
appears flat until you change it. To help you customize a course, blank
profile grids are provided at the end of this manual.
7. You can continue to change the course profile for a maximum of twelve
miles. Or, you can press STOP to end the session. The prompt, “To Save
Changes - Press ENTER” appears and scrolls across the display.
8. To save your selection, press ENTER. The next time you work out, you can
recall this custom course by entering the appropriate program course
number at the PROGRAM prompt.
Note: If you wish to discard the changes and revert back to the previous
custom course, press either the or key before pressing the ENTER
key. The prompt, “To Discard Changes - Press ENTER” scrolls across the
display. Press ENTER to discard your custom course changes.
When you have saved your custom course changes, you can work out and use
the same course over and over by entering the associated user I.D. and
program course number. The M8.2E/L recumbent can store two custom
courses (program course numbers “7” or “8”) for each user I.D.