page 2
Unpacking the M8.2E/L Recumbent Cycle
The M8.2E/L recumbent cycle is carefully inspected before shipment, so it
should arrive in good operating condition. Precor ships the unit in five pieces as
listed below:
• electronic console
• cycle base
• cycle seat
• heart rate monitor
• hardware kit, Owner’s Manual, and limited warranty card
Carefully unpack the parts from the original shipping container.
Hardware Kit
Diagram 1
After unpacking the cycle open the hardware kit, shown in Diagram 1, and
make sure that you have the following items:
(A) four bolts—seat assembly
(B) two bolts—electronic display assembly
(C) one 5/16" hex key
(D) one 3/8" hex key
(E) two internal washers
If any items are missing, contact the dealer from whom you purchased the
cycle, or call 1-800-4-PRECOR for the authorized Precor dealer nearest you.
Important: The packaging for this equipment was designed to protect it during
shipment. If you plan to move in the near future, store the original packaging in
a safe place in case you need to ship the M8.2E/L recumbent cycle.
D
C
A
B
E
To Next Page
Loading...
