Precor M8.2E - Using the Manual Course Mode; Using the Preprogrammed Courses

page 21
Using the Manual Course Mode
In addition to choosing a preprogrammed, custom, interval, or weight loss
course, you can choose the manual course mode. Manual mode lets you use
the cycle for an indefinite period of time while controlling the gear and work
level. All of your workout statistics are compiled and stored with your user I.D.
To use manual mode, follow the steps in Working Out on the M8.2E/L Recum-
bent Cycle . At the program prompt, enter program “1.”
Using the Preprogrammed Courses
The M8.2E/L recumbent is equipped with five preprogrammed courses that
vary in distance, time, and incline. Refer to Diagram 10 for a representation of
the course profiles or consult the placard that slides out from behind the top of
the electric console display.
To use the preprogrammed courses, follow the steps in Working Out on the
M8.2E/L Recumbent Cycle. At the program prompt, enter any program number
“2” through “6.”
During your workout, the gears are preset as shown in the course profile that
appears in left window display. You cannot adjust the gear level.
With the completion of your workout program, your best performance (time or
distance) is saved and recorded. The next time you workout, it appears as the
RECORD display when the program prompt appears.
Note: Your best performance is associated with a particular course program
and only appears with the program prompt if you have previously used the
program.