v
Grounding Instructions
The M9.1 or M9.2s Precision Electronic Treadmill must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance for electric current which reduces the
risk of electrical shock. The treadmill is equipped with a power cord having an equipment-
grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the treadmill is
properly grounded. Do not modify the plug provided with the treadmill—if it doesn’t fit the outlet,
get a proper outlet installed by a qualified technician.
Proper grounding plug and
power outlet for 120v
connection
Diagram A
The treadmill is for use on a nominal 120-volt circuit (refer to the WARNING below and to the
Installation
Requirements
on page 3) and has a grounding plug that looks like the plug illustrated in
Diagram A.
WARNING
This product is rated for
more
than 15 amps and is for use on a circuit having a nominal rating of
120 volts and is factory-equipped with a specific electric cord and plug to permit connection to a
proper electric circuit. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product. If the treadmill must be
reconnected for use on a different type of electric circuit, the reconnection should be made by
qualified service personnel.
ATTENTION: Haute Tension
Débranchez avant de réparer
To Next Page
Loading...
Need help?
Power
Performance
Weight and Dimensions
