Precor Media Adapter - Activate the Media Adapter

Activate the Media Adapter
By default, the networked fitness console is configured to use its internal tuner instead of the Media Adapter option. Before you can
import your finished channel list file, you must activate the Media Adapter.
To configure the console to accept signals from the Media Adapter:
1. On the Welcome screen, press and hold
Volume Down
.
2. While holding
Volume Down
, press each of the following keys once in the order presented. Refer to the diagram below and press:
1 2 3 4
Channel Up
Channel Down
Channel Down
Channel Up
3. Release
Volume Down
.
4. Using the on-screen keyboard, touch the following numbers to enter the password:
5 6 5 1 5 6 5
5. Touch
OK
.
6. At the Settings menu, select
System Settings
, then
TV Settings
, then
TV Source
.
7. Select
Set Top Box
from the TV Source list, choose an option, then touch
OK
.
8. Touch
BACK
twice to return to the Settings menu.
To import the channel guide file:
1. On the Settings menu, touch
System Settings
, then
TV Settings
, then
Export/Import Channel List
.
2. When the box is selected, touch
Import from USB
. The current channel guide file is loaded and the Channel Guide displays the
updated channel names.
3. Touch
OK
to return to the System Settings menu, then touch
BACK
to return to the Settings menu.
4. Touch
BACK
twice to return to the Welcome screen.
Important You must return to the Welcome screen before you remove the USB drive.