Setting Up Your
Equipment
After the console is installed, it needs the following
information to work correctly:
The model number of the equipment
The date and time
Your measurement preferences (kilometers or
miles)
You will need to enter this information before you can
start to use the equipment. If you need to change it
later, you can do so at any time (refer to Changing the
System Settings).
Note: You can find the model number of your
equipment on the sales receipt, invoice, or packing list
that you received with the equipment.
To set up the console:
1. Turn the equipment on.
2. At the Welcome screen, touch Start.
Figure 9: Welcome screen
3. At the Initialize Your Equipment screen, touch
Next.
Setting Up Your Equipment 21
To Next Page
Loading...
Need help?
General
