Precor TRM 885.v2 User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 18
METRICS BOARD
SW
Displays the current version of software loaded in the metrics board.
SER. NUMBER
The base serial number can be set here using the WinCSAFE computer software.
The factory default is NONE.
USAGE LOG
Displays the type of workout programs the users are accessing most frequently.
ERROR LOG
Displays a running log of the last 30 errors encountered on the unit.
TREADMILL
MAINTENANCE
Used to monitor and reset the 1000 mile belt cleaning maintenance reminder.
Mileage counter starts at 1000 miles and decreases to 0 miles which triggers a
blue pulsing ASL light indicating it’s time for belt cleaning maintenance.
The maintenance counter and ASL light is reset as follows:
P10/P30 console
1. Select Treadmill Maintenance.
2. Press and hold QUICKSTART until 1000 Miles is displayed. The ASL light is also
reset.
3. Exit the menu by pressing BACK or PAUSE/RESET.
P80/P82 consoles:
1. Access the service diagnostics (5,1,7,6,5,7,6,1).
2. Select Maintenance page.
3. Select Next Maintenance Due page > Reset.
On P82/P80 consoles, the belt cleaning reminder ASL function can be switched ON
or OFF, select Maintenance Reminder > ON/OFF.

Precor TRM 885.v2 Specifications

General

Brand	Precor
Model	TRM 885.v2
Category	Treadmill
Language	English