Page 2 For technical questions, please call 1-888-866-5797. ITEM 62548
Table of Contents
Specifications ............................................. 2
Safety ......................................................... 3
Setup .......................................................... 8
Operation ................................................... 10
Maintenance .............................................. 16
Troubleshooting ......................................... 22
Parts List and Diagram .............................. 24
Warranties ................................................. 27
Specifications
Front Tine Tiller Specifications
Maximum Tilling Depth 6.5" (165 mm)
Maximum Tilling Width 26" (660 mm)
Drive Type Belt and Chain
Drive Actuation Clutch Drive (Handle Lever Operated)
Depth Adjustment Steps 6
Overall Dimensions 51" L x 25" W x 42-1/2" H
Wheels 8" Diameter x 1-3/4" W
Weight 118 Pounds
Engine Specifications
Displacement 208cc
Engine Type
Horizontal Single Cylinder
4-stroke
Cooling System Forced air cooled
Fuel
Type
87+ octane unleaded gasoline
treated with fuel stabilizer
Capacity 0.66 Gallon (2.5 Liter)
Engine Oil
Type SAE
10W-30 above 32° F
5W-30 at 32° F or below
Capacity 20 ounces (0.6 Liter)
Sound Level at 1 meter 95 dB
Bore x Stroke 70 mm x 54 mm
Compression Ratio 8.8:1
Rotation viewed from PTO
(power takeoff - the output shaft)
Counterclockwise
Spark Plug
Type Torch
®
F6TC
Gap 0.0275" – 0.0314"
Valve Clearance
Intake 0.0059" – 0.0078"
Exhaust 0.0059"– 0.0078"
Speed Idle 1560 ± 50 RPM
The emissions control system for this Engine is warranted for standards set by the
U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual.
To Next Page
Loading...