Predator ORION 3000 User Manual

12 - UPGRADING YOUR COMPUTER
Removing a memory module
1. Perform the Pre-installation instructions on
page 2 .
2. Remove the graphics board. See Removing the
graphics board on page 14 .
3. Press outward the holding clips on both sides
of the DIMM slot outward to release the
memory module ( 1 ).
4. Gently pull the memory module upward to
remove it from the DIMM slot ( 2 ).
5. Repeat steps 3~4 to remove the other
memory modules.

Predator ORION 3000 Specifications

General

Operating System	Windows 10 Home
Networking	Gigabit Ethernet
Power Supply	750W
Connectivity	Bluetooth
Ports	USB 3.2
Cooling	Air Cooler or Liquid Cooler (depending on configuration)