Predator ORION 3000 - M.2 SSD Module Installation; Removing M.2 SSD Modules

18 - UPGRADING YOUR COMPUTER
M.2 SSD modules
The computer contains two M.2 SSD modules
installed in the M.2 PCIE slots.
Removing the M.2 SSD1 module
1. Perform the Pre-installation instructions on
page 2 .
2. Remove the graphics board. See Removing the
graphics board on page 14 .
3. Remove the screw that secures the M.2 SSD1
module from the mainboard.
4. Detach the M.2 SSD1 module from the
mainboard.