Predator ORION 3000 User Manual

16 - UPGRADING YOUR COMPUTER
Installing the Graphics board
1. Remove the new graphics board from its
packaging.
2. Insert the graphics boards into the PCIE x16
slot and press it down until it latches into place.
3. Press the metal clip to secure the graphics
board bracket.
Note
To replace/upgrade graphic board, please check the specification of graphic
board & power supply first in order to make sure the graphic board and power
supply could work.

Predator ORION 3000 Specifications

General

Operating System	Windows 10 Home
Networking	Gigabit Ethernet
Power Supply	750W
Connectivity	Bluetooth
Ports	USB 3.2
Cooling	Air Cooler or Liquid Cooler (depending on configuration)