1
SAFETY CONSIDERATIONS
Recognizesafetyinformation. This is the safety-- alert
symbol
. When you see t his symbol on the unit and
in instructions or manuals, be alert to the potential for
personal injury.
Understand these signal words:
DANGER,
WARNING, and CAUTION. These words are used
with the
safety --alert s ymbol . DANGER identi fies the
mos t s erio us h azards which will result in severe
perso nal
inj u ry or d eath . WAR NING si g ni fi eshazards
which cou l d result in personal injury or death.
CAUTION i s used t o id ent i fy uns afe practi ces wh ich
may result in minor personal i njury or product and
property damage. NOTE is used t o highlight
suggestions which will result in
enhanced
installation,
reliability, or operation.
PERSONAL INJURY AND/OR PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal injury,
death and/.or property damage.
For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric
shock, or to prevent property damage, personal injury, or loss
of life.
S This unit must be properly installed in accordance
with the Installation Instructions before it is used.
S Immediately repair or replace all electric service
cords that have become frayed or otherwise
damaged.
S Unplug or disconnect the unit at the fuse box or
circuit breaker before making any repairs.
NOTE: We strongly recommend that any servicing
be performed by a qualified individual.
GENERAL INFORMATION
PremAire
package t erm i n al ai r cond i t i on ers and heat
pumps
provide a high standard of quality
in
performance,
workmanship, durability and
appearan ce as t h ey heat and cool t he occup i ed air
space year round.
This manual provides information for ease of
installation, operation and maintenance.
All m odels are designed for through -- the --wall
installation. Separate installation instructions are
incl uded wit h al l accesso ry component s.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local
inspector’s use.
IMPORT ANT: Observe all governing codes and
ordinances.
NOTE TO INSTALLER
Be sure to leave these instructions with the owner.
NOTE TO OWNER
Keep t h ese in st ru ct io n s for futu re r eference. Be sure
to write down the model and serial number of unit on
space provided on back page. The model and serial
number can be located on the serial number plate
attached to unit. These numbers are required for
servi ce. (S ee F i g . 1.)
Fig. 1 – Sample Data Information Plate
!
WARNING
To Next Page
