4
Installation
Unpacking and Initial Setup:
Note: Do not plug mixer into a power strip or multi-outlet power cord.
Check the Planetary Shaft Rotate Direction
Operation Instruction
Carefully remove carton, crating or
package material from equipment. Mixers
on pallets are bolted on the pallet, insert
wrench under pallet to loose belt. When
no longer need, dispose of all packing
material in an environmentally responsible
manner.
Place the mixer on a solid, level
surface with sufficient space around mixer
to allow for the safe cleaning and service.
Plug only into grounded electrical
outlets matching the nameplate rated
voltage.
Make sure there is not anything in bowl, and no mixer
tool on the shaft, put speed lever on one speed and
turn on the mixer;
Observe the shaft rotate direction is comply with the
arrow showed on the planetary shaft or not
If shaft rotates in the wrong direction, have a licensed
electric technician switch the electrical connection
and reset.
DO NOT operate the mixer before reading the instruction
first;
ALWAYS disconnect or unplug electrical power before
leaning, servicing or adjusting any parts or attachments;
ALWAYS keep hands, hair, and clothing away from moving
parts.
To Next Page
Loading...