5. Operate the DMX-40 transceiver as if it is the controller, and operate your external
transceiver as if it is merely a receiver and transmitter. In other words, you should
be operating the external receiver controls, but not the transmitter controls, which
should automatically engage when a key-down event occurs, and return to receive
mode either immediately when a key-up event occurs (full break-in) or after a brief
time (partial break-in).
That is a brief overview of setting up and operating your DMX-40. A more detailed
description of features and functions is provided in the DMX-40 Reference Manual,
which uses many internal links and an accessible from every page linked table of
contents to help you find what you need to know. Also, make use of the PreppComm
Community. There are a lot of Q&A’s already there, and plenty of other DMX-40 users
out there who have asked the same question you have, or have answered someone’s
question. It is also a place to get answers from the factory.
To Previous Page
