Prescitech E300 - Power on the E300

05
Switch the power button “ON” & the mode button to
“Repeater” on the side of the E300. Plug the E300
into an electrical outlet which next to your WIFI
router. The E300 plugged in the proximity of the
WIFI router only for the initial setup process.
Power on the E300
1
WPS
WLAN
Power/WPS
WAN/LAN
LAN
ON
OFF
Repeater
Access Point
Router
Power/WPS
WLAN
WAN/LAN
LAN
Access Point
Router
Repeater
ON OFF
Blinking