EasyManua.ls Logo

PRESONUS CDL12P - Hookup; Rear-Panel Connections and Controls; Onboard Performance Monitoring; Onboard Tuning Features

PRESONUS CDL12P
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Application and Deployment
2.8 Pole Mounting Options
CDL12P
Owners Manual
8
2.7.3 Using the CDL12P Rigging Sling with the CDL12P Rigging Grid
WARNING: The CDL12P Rigging Sling is required on all installations that include
4 or more CDL12P loudspeakers in a vertical array. Additionally, in
installations using the CDL Rigging Extension Bar deployed with an upward
or downward tilt of 12˚ or greater, the CDL Rigging Sling must be utilized.
2.8 Pole Mounting Options
You can mount up to two CDL12P loudspeakers on a loudspeaker pole either
using a tripod stand that supports the total weight (130 lbs / 58.9 kg) or atop
a CDL18s. A single CDL12P may be mounted atop a ULT18, or AIR18. When
mounting atop a supported PreSonus subwoofer, utilize a sub pole that
supports the total weight of the CDL12 loudspeaker(s). If mounting atop a
subwoofer, the elevation height cannot exceed the following guidelines:
Maximum Sub Pole Height
(1) CDL12P +
(1) CDL18s, ULT18,
or AIR18s
(2) CDL12P +
(1) CDL18s
(1) CDL12P + (2)
CDL18s
40” 33.5” 17”
2.8.1 Important Pole Mounting Safety Instructions
Always check the stand or pole specication to verify that it is
designed to support the weight of the CDL12P loudspeaker(s).
Always observe all safety precautions specied by any 3rd party
manufacturer of devices used with the CDL12P loudspeakers.
Always verify that the stand or subwoofer and subwoofer
pole is resting on a level, at, and stable surface.
Tripod legs should be fully extended for maximum stability and positioned
in a low-trac area so that the legs do not create a tripping hazard.
Route cables so that no one will trip over them as this could topple
the speaker and cause serious injury, damage, or death.
Stands, poles, and associated hardware should be inspected prior to each
use. Do not use equipment with worn, damaged, or missing parts.
For some applications, it may be necessary to place additional weights,
such as sandbags, on the base of the stand to for maximum stability.
Do not attach banners to the stand as these could function like a sail
to topple the system, causing serious injury, damage or death.

Related product manuals