The FireStudio Mobile enables you to simultaneously
record and play back up to ten channels. You can plug
two microphones directly into the FireStudio Mobile’s two
preamplifiers and can use the line- level inputs to
connect external microphone preamplifiers, such as the
PreSonus BlueTube DP, Studio Channel, Eureka, or ADL
600. These line inputs can also be used to connect
synthesizers, amp-modeling hardware, etc. External
analog-to-digital converters can connect to the S/PDIF
inputs. This makes recording extremely easy. All you
need are microphones, cables, and monitor speakers.
FireStudio Mobile with an
External Preamp and
Monitoring System
Cables and Connectors:
1 XLR (M) - XLR (F) (mic cable)
6 TRS - TRS
3 TS - TS (guitar cable)
1 TRS - XLR (F)
2 TRS - XLR (M)
1 FireWire 400 (computer cable)
TRS - TRS
TS - TS
XLR (M) - XLR (F)
TRS - TRS
TRS - TRS
TRS - TRS
TRS - TRS
TRS - TRS
TRS - XLR (M)
TRS - XLR (M)
TS - TS
TRS - XLR (F)
FW400
Lead Vocal
Guitar & Processor
Guitar with Mic’d Cabinet
Bass
Computer with FireWire
Synth or Controller
PreSonus Studio Channel
Active Monitor Speakers
