Pressure Systems NetScanner 9116 - Appendix A: All Commands - Quick Reference

Pressure Systems, Inc. Model 9116 User’s Manual
Page 125 www.PressureSystems.com
Appendix A
All Commands – Quick Reference
Type Command id Command Function
A
Power-Up Clear
B
Reset
C
Configure/Control Multi-Point Calibration (4
sub-commands)
V
Read Transducer Voltages
Z
Calculate and Set Gains (Span Cal)
a
Read Transducer Raw A/D Counts
b
Acquire High Speed Data
c
Define/Control Autonomous Host Streams
(6 sub-commands)
h
Calculate and Set Offsets (Re-zero Cal)
m
Read Temperature A/D Counts
n
Read Temperature Voltage
q
Read Module Status
r
Read High Precision Data
t
Read Transducer Temperature
u
Read Internal Coefficients
v
Download Internal Coefficients
TCP/IP
Commands
w
Set/Do Operating Options/Functions
psi9000
Query Network
psireboot
Reboot Specified Module
UDP/IP
Commands
psirarp
Change Specified Module’s IP Address
Resolution Method (then Reboot)